This is one of the weak points of the device – whenever you change settings you need to restart the DG Unfortunately the DG does not switch on when external power is applied. The usage of a low power GPS chipset allows uninterrupted logging for 32 hours. When the unit is dropped it will likely also stop logging because it may switch off the batteries may lose contact briefly. What this means is you cannot use the DG out of the box – you need to first have access to a computer with a CD drive.

Uploader: Zololabar
Date Added: 26 April 2014
File Size: 67.50 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 77008
Price: Free* [*Free Regsitration Required]

That user guide is on the provided CD. When the memory is full, logging will stop. Switching the device off globalsat dg-100 connected to Globalsat dg-100 is not easy either – it is not really globaalsat if you actually managed to switch the device off or not because the LEDs are overridden by the applied power.

Speaking of the USB cable – it may look a bit strange globalsat dg-100 first, and you might wonder if it will be dangling loose after a short while. The data logger program comes on the included CD but can also be downloaded from Globalsat’s website. I don’t think I like that approach – I would want to globalast able to start a new track by power cycling the device globalsatt globalsat dg-100 is done on the Wintec WBT Here you select the COM port that was assigned to the globalsat dg-100 at the time of installing the CP driver.

Or you could disable your ad-blocker for this site. Instead of logging in the new mode the device simply stopped recording.

  ROLAND TD11 DRIVER FOR WINDOWS

To add insult to injury the device switches off when USB power is applied. However, Globalsat have cunningly incorporated a little magnet into the body of the DG, and this engineering trick globalsat dg-100 the USB cable firmly in place when it is not in use. Instead, you need to install the CPx driver, again either from the web or from the provided CD.

If you want to use it in rough conditions make sure globalsat dg-100 provide appropriate protection in the form of a watertight Otterbox or equivalent. What this means is you cannot use the DG out of the globalsat dg-100 – you need to first have access to a computer with a CD drive.

GlobalSat DG GPS data logger review

For example the operation time is understated significantly which is actually a good thing. This is one of the weak points of the device – whenever you change settings you need to restart the DG Carrying globalsat dg-100 DG on the belt is possible but due to the size of the device this is not overly convenient.

globalsat dg-100

Note that there is no option to specify if you want to overwrite old data. Switching between A,B and C will not globalsat dg-100 change the logging mode – for the logging to resume with globalsat dg-100 new parameters you have to power cycle the data logger!

GlobalSat DG-100 Handheld

Stock Alkaline AA batteries will last quite a bit longer. Here are the details that are listed in the user manual. I would dg–100 that future data loggers could be equipped with solar cells to extend the battery life globalsat dg-100.

Overview Firstly, this globalsat dg-100 really mostly just a data logger.

  BELKIN USB 2.0 7 PORT HUB DRIVERS

I hope Globalsat can fix that weakness in future versions. The battery compartment cover globalsat dg-100 not overly user friendly, and did not survive a little drop oops either.

Globalsat DG GPS Data Logger Specs – CNET

Globalsat dg-100 also had a rough day, and showed quite a few bogus data points in countries far, far away Look at that speed!!! The logger globalsat dg-100 still be in standby mode, with globalsat dg-100 GSM module powered by the solar cell, so that you could wake it up and configure it via SMS I also liked the fact that the low battery warning comes relatively early, giving you enough time to react.

When the unit is dropped it will likely also stop logging because it may switch off the batteries may lose contact briefly. You can either affix the adapter with the provided double sided tape or – less permanent – with a litte provided globalsat dg-100.

If you are happy with that feature set then the DG is certainly worth considering. First globalsat dg-100 need to install the gllbalsat for the USB-to-serial bridge.

Globalsat dg-100 the side of the device is globqlsat mode switch. Specifications Here are globalsat dg-100 details that are listed in the user manual. The usage of a low power GPS chipset allows uninterrupted logging for 32 hours. So, let’s look for something else that differentiates this device from the other data loggers on the market.